ABOUT M & H PUMPS

We are the specialists and innovators of all sized new and reconditioned “bulk” fuel meters, pumps and equipment. We pride ourselves on being the supplier that brings cutting edge technology and innovation to our clients. We supply a wide variety of petrochemical equipment to various sectors like the mining, industrial, lubrication, chemical, petroleum and transportation of fuel industries.

Slider
ABOUT M & H PUMPS

We are the specialists and innovators of all sized new and reconditioned “bulk” fuel meters, pumps and equipment. We pride ourselves on being the supplier that brings cutting edge technology and innovation to our clients. We supply a wide variety of petrochemical equipment to various sectors like the mining, industrial, lubrication, chemical, petroleum and transportation of fuel industries.

Slider
Slider

Pumps

GORMAN RUPP O SERIES

Description:
50mm – 150 mm (2″ – 6″)
Gorman Rupp O Series = 5110 LPM

Gorman-Rupp O Series® selfpriming centrifugal pumps have a straight-in suction design which eliminates entrance restrictions and provides better performance when handling a variety of clear liquids.

GORMAN RUPP 80 SERIES

Description:
50mm – 150mm (2″ – 6″) Ports
Gorman Rupp 80 Series = 10599 LPM
Material = Grey Iron

Gorman-Rupp 80 Series® medium head, mild solids-handling, self-priming centrifugal pumps are designed for non-stop work loads.

FILL RITE HAND CRANK PUMP

Description:
25.4mm (1″) inlet – 19.05mm (3/4″) outlet
Fill Rite Hand Crank = 38 LPM (100 Revolutions)

Specs: 10 GPM / 38 LPM in 100 revolutions Counter totalizer to 10,000 units Built-in strainer and check valve Equipped with vacuum breaker Easily accessible operating mechanism for cleaning

PUISI CUBE DISPENSER SERIES

Description:
Models Range from Cube 56/33 – Cube 70/33
Flow rates = 55 LPM – 72 LPM

Equipment and features are:
  • Self-priming rotary vane pump with incorporated by-pass valve.
  • Motor with protection grade IP55 and thermal protection, 230V AC single-phase.
  • Brush motor powered by continuous current, low voltage, with intermittent cycle, closed type, IP55 protection class according to CEI EN 60034-5, flange-mounted directly to the pump body (version Panther Dc).
  • Four meters of anti-static rubber tube for fuel. •Automatic type dispensing nozzle with on- off switch integrated into the nozzle rest.
  • Steel body with anti-corrosion treatment and paint finish.
  • 110/120 V AC-60 Hz motor on request.

EAGLE CENTRIFUGAL PUMP

Description:
Working Pressure = 10 BAR
Eagle Pump = up to 30000 LPM

Volute casing pumps of the EAGLE range are used in all applications involving the trouble-free handling of clean or turbid non-abrasive liquids which do not contain any solid constituents. Hence the are suitable for :
  • Drinking water supply of local communities
  • Airconditioning
  • General water supply duty in agriculture , trade and industry
  • Irrigation and draining
  • Spray irrigation
  • Handling of brine and lye
  • Demineralised water (S.S.)
  • Circulating high temperature up to 170°C , cooling water and oil in heating and cooling circuits
  • Thanks to exceptionally favorable NPSH , pumps of the EAGLE range are also used with advantage
  • For handling condensate
  • In suppling sprinkler systems

MOBILE PUMP SKIDS

Please contact us for custom specs and application use. All Mobile Pump Out Units can be quickly set up and just as easily removed to suit pumping of Petro Chemical products to Waste Materials.

ROPER A SERIES PUMP

Description:
37.5mm – 50mm (1,1/2″ – 2″)
Roper 3600 Series = 223 LPM
Working Pressure = 20.7 BAR

General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer Up to 59 GPM ? Up to 300 PSI

Typical Applications:
Mix, circulate, and transfer viscous liquids
Gasoline, asphalt, molasses
Ink, roofi ng compounds, oils
Precise tolerances for maximum efficiency
Direct drive or built-on gear reducers
Bi-directional rotation*
Configurations available for close coupled drive and close coupled hydraulic drive

ROPER 3600 SERIES PUMP

Description:
50mm – 100mm (2″ – 4″)
Roper 3600 Series = 1771 LPM
Working Pressure = 8.6 BAR

General Purpose Pumps for Mixing, Blending, Recirculating, Fixed and Mobile Transfer Up to 468 GPM • Up to 125 PSI

Typical Applications
Mix, circulate, and transfer viscous liquids
Gasoline, asphalt, molasses
Ink, roofi ng compounds, oils
Precise tolerances for maximum effi ciency
Direct drive or built-on gear reducers
Bi-directional rotation*
Configurations available for close coupled drive and close coupled hydraulic drive

BLACKMER SLIDING VANE PUMP

Description:

Adjustable relief valve protects pump from excessive pressure. Optional air operated relief valve offers easy hose and nozzle handling. T-type strainers are available to protect pumping systems from damage caused by welding slag and foreign matter in the piping and tanks.

MAI-DE YB VANE PUMP

Description:
550mm – 100mm (2″ – 4″) Ports
Mai-de YB Vane Pump = 329 – 1900 LPM (Depends on Model)
working Pressure = 12.1 BAR

YB Self priming rotary vane pump with internal bypass valve. The pumps use a rotor with sliding vanes to draw the liquid. The material of construction is nodular iron with sliding vanes built in a special self-lubricating material. Due to its efficiency, the pumps can handle viscous and also volatile liquids and require less horsepower than other equivalent pumps. The pumps are capable of higher floaters at lower number of revolutions than other designs.



RAPID ALLWEILER PUMP NT

Description:
50mm – 100mm (2″ – 4″) Ports
Rapid Allwieler Flow Rate = 18333.33 LPM (1100 M³/h)

APPLICATION:
  • Chemical and Pharmaceutical Industry
  • Mineral Oil
  • Food, Laundries and Textile
  • Leather and Paper
  • Wood Manufacturing
  • Paint and Lacquer
  • Building, Tar and Bitumen
  • Electrical Engineering Industries

RAPID ALLWIELER NSHD

Description:
50mm – 100mm (2″ – 4″) Ports
Rapid Allwieler Flow Rate = 18333.33 LPM (1100 M³/h)

DESCRIPTION:
  • Suitable for clean liquids which are not chemically aggressive to the pump materials.
  • Standard as single stage pumps with a variety of sizes offering a two stage options.
  • Interchangeability – The entire range offers 40 different sizes, utilizing only 5 bearing brackets, therefore allowing for less stock holding.
  • Pump Flanges are rated for 10 bar and drilled to EN 1092.1 (PN 10/DIN 2532).

FILL RITE 12V DC PUMP

Description:
Fill Rite DC = 57 LPM – 76 LPM
Working Pressure = 0.83 BAR

The Fill-Rite Series FR1200C, FR2400C, FR4200D and FR4400 products are positive displacement, rotary vane pumps. Their rugged motors are explosion-proof and rain-proof to ensure a long life of dependability